Top 5 Best SSD for PS5 2024

Obtaining the finest SSD for PS5 should be your first concern if you intend to add more games to your collection. Even though the November 2023-released PS5 Slim has a little bit more storage than the PS5’s first launch edition, the majority of PS5 owners currently only have access to roughly 660GB of internal storage.

Regardless of the console version you own, your internal storage can quickly fill up with the installation sizes of several popular games, such as Call of Duty: Modern Warfare 3 and Horizon: Forbidden West, which can weigh in at well over 100GB. It merely takes a few minutes to install a suitable SSD on your PS5, which can significantly improve storage space and allow you to run more games concurrently on the device.

Since there are a lot of SSD models available on the market right now, we have carefully produced this handy list of the best solutions to fit your demands and budget. We have tested a wide range of SSD models. After you have purchased your SSD, make sure to read our step-by-step installation guide for the PS5 SSD before proceeding. Check out our guide to the top PS5 external hard drives if you’d want to think about some alternative storage possibilities.

QUICK LIST

Last update on 2024-05-6 / Affiliate links / Images from Amazon.

Top 5 Best SSD for PS5 2024

1.Inland Gaming Performance Plus

Last update on 2024-05-6 / Affiliate links / Images from Amazon.

Despite not offering anything novel, the Gaming Performance Plus 2TB excels in all significant areas. It has a six-year warranty, a straightforward design, high performance, and is available in brick and mortar stores.

Peak bandwidth for the Inland Gaming Performance Plus over the PCIe 4.0 interface is 700,000 IOPS, with a rating of up to 7.0 GBps. This is comparable to many other drives, such as Inland’s standard Performance Plus that we previously evaluated, that are built on the Phison E18 SSD controller. With a focus on gaming, the new Gaming Performance Plus drive is expressly touted as being compatible with the Playstation 5 (PS5).

The Inland Prime, an entry-level drive with a surprisingly good six-year guarantee, was also recently reviewed by us. Actually, six years is the support period for the Inland Gaming Performance Plus, which is a little longer than the usual five. Note that at 700TBW per TB of capacity, warrantied writes are not particularly noteworthy.

SPECIFICATIONS

Product	1TB	2TB
Capacity (User / Raw)	1000GB / 1024GB	2000GB / 2048GB
Form Factor	M.2 2280	M.2 2280
Interface / Protocol	PCIe 4.0 x4 / NVMe 1.4	PCIe 4.0 x4 / NVMe 1.4
Controller	Phison E18	Phison E18
DRAM	DDR4	DDR4
Memory	Micron 176L TLC	Micron 176L TLC
Sequential Read	7,000 MBps	7,000 MBps
Sequential Write	5,500 MBps	6,850 MBps
Random Read	350,000 IOPS	650,000 IOPS
Random Write	700,000 IOPS	700,000 IOPS
Security	N/A	N/A
Endurance (TBW)	700 TB	1,400 TB
Part Number	356113	356139
Warranty	6-Year	6-Year

Although the SSDs’ IOPS is noticeably lower than those of other E18 drives—especially ones with 176-layer flash—this is not really significant for a consumer disk in real life. Furthermore, considering that previous specifications for other inland drives have been incorrect, those constraints might not be accurate.

Software and Accessories

The characteristic of inland drives is their lack of superfluous software. Since Phison SSD controllers are typically their basis, generic or universal firmware updates are occasionally available. Nevertheless, firmware updates ought to be infrequently required.

Additional functionality, such cloning and health monitoring, can be controlled with free software programs like Macrium Reflect Free and CrystalDiskInfo (CDI). It makes sense for Inland to want to limit its support system, but if it so chooses, it has a chance to differentiate itself in the future.

2.WD Black SN850X

Last update on 2024-05-6 / Affiliate links / Images from Amazon.

SPECIFICATIONS

Capacity: 500GB / 1TB / 2TB

Quoted read / write speed: 7,000 / 5,300 MB/s (1TB)

Quoted endurance: 600 TBW

Heatsink: Yes

To put it simply, the best SSD for the PS5 overall is the WD Black SN850. Known for being utilized by the console’s architect Mark Cerny, this storage drive significantly surpasses Sony’s read requirements of 5,500 MB/s and is equipped with a substantial heatsink to prevent performance issues caused by thermal throttling when the console becomes hot.

It’s also a very affordable option because, in 2024, the larger 2TB configuration often retails at a minimum amount, while the 1TB variant is easily available for a very reasonable price. Generally speaking, the ordinary non-branded heatsink model is well priced, though we wouldn’t suggest it quite as strongly. But be advised that in order to utilize this model with your PS5, you will need to install your own heatsink.

During testing, we discovered that the WD Black SN850 achieved 6,550 MB/s in Sony’s internal benchmark, indicating outstanding performance. With its own controller and SanDisk flash memory, the drive’s ability to remain competitive even after several years of release is a tribute to its high level of construction.

3.Samsung 990 Pro 4TB

Last update on 2024-05-6 / Affiliate links / Images from Amazon.

SPECIFICATIONS

Capacity: 1TB / 2TB / 4TB

Quoted read / write speed: 6,900 / 7,450 MB/s

Quoted endurance: 600TBW (1TB)

Heatsink: Yes

Few other SSDs for the PS5 can match the Samsung 990 Pro’s ability to maximize the potential of NVMe Gen 4.0 technology. In comparison to the competition, this high-speed drive, which comes in 1TB and 2TB capacities, is incredibly impressive in every way.

In our testing, we found that the Samsung 990 Pro was able to achieve read and write speeds of 7,465.49MB/s of 6,887.68MB/s respectively in our industry standard tests. That’s a considerable improvement on the brand’s previous flagship model – increasing the drive’s speed by around 50%. Loading times and file transfer times are equally impressive. In our testing, around 10GB of data made the jump to this NVMe SSD in less than four seconds which is incredibly fast.

Remember that the Samsung 990 Pro is currently a bit more expensive than some of the other SSDs for PS5 in our roundup.

For the greatest experience, be sure to acquire the version with the PS5 compatible heatsink installed, or fit your own, as it also runs very hot when pushed to its maximum.

4.Addlink A93 4TB

Last update on 2024-05-6 / Affiliate links / Images from Amazon.

SPECIFICATIONS

Capacities: 1TB, 2TB, 4TB

Form Factor: M.2 2280

Transfer Interface/Protocol: PCIe 4.0 x4 / NVMe

Sequential Reads/Writes: Up to 7,400 / 6,500 MBps (unofficial)

Warranty/Endurance: 5 Years / Up to 3,000 TBW

Most SSD fans aren’t acquainted with Addlink, but the firm appears to be growing and the technology is decent enough. The A93 combines 232-layer YMTC TLC NAND with the Maxio MAP1602A controller for a powerful mix of performance, efficiency, and perhaps.

The Addlink A93 outperformed more expensive PS5 SSDs in our testing. Our copy to and from findings, along with the PS5 read speed test, were almost identical to those of most other drives. The drive even has a heatsink as standard, but generally, we believe the Sabrent PS5 heatsink is a better choice because it allows for direct airflow access rather than hiding the SSD.

Keep in mind that the Maxio MAP1602A lacks DRAM; to overcome this, it uses the host memory buffer (HMB) capability on Windows PCs. However, performance was good even on the PS5. If you’d prefer another option, the Phison E18 controller and 176-layer Micron TLC NAND of the Netac NV7000 4TB are used, whereas the same controller and NAND are used by the Lexar NM790 4TB and Silicon Power US75 4TB (see below).

5.Crucial T500

Last update on 2024-05-6 / Affiliate links / Images from Amazon.

SPECIFICATIONS

Capacities: 500GB, 1TB, 2TB

Form Factor: M.2 2280 Single-sided

Transfer Interface/Protocol: PCIe 4.0 x4

Sequential Reads/Writes: 7,400 / 7,000 MBps

Warranty/Endurance: 5 Years / Up to 1,200 TBW

Capacities: 500GB, 1TB, 2TB

Form Factor: M.2 2280 Single-sided

Transfer Interface/Protocol: PCIe 4.0 x4

Sequential Reads/Writes: 7,400 / 7,000 MBps

Warranty/Endurance: 5 Years / Up to 1,200 TBW

The PCIe 4.0 x4 NVMe SSD Crucial T500 is a high-performance drive that can achieve up to 1.18 million IOPS and read and write throughput rates of up to 7.4 GB/s and 7.0 GB/s, respectively. It achieves exceptional performance and efficiency by utilizing Micron’s 232-layer TLC NAND in conjunction with the most recent Phison E25 controller with DRAM.

The drive performs admirably for the PS5, and although it doesn’t quite match the fastest drives in the read test, it performs almost as well in our practical file copy testing. Because the differences between the fastest and slowest SSDs in real-world gaming are so little, as we mentioned in our test section, the T500’s price tag may appeal to those of us who are value-conscious.

Although the 2TB drive’s endurance rating of 1,200 TBW is a little lower than that of some of the competitors, is anyone really going to full and wipe the drive 600 times while using it in a PS5? We believe not. If you’re looking for a comparable performing option that might save you some money, consider the Crucial P5 Plus. Sales may apply.

How to Choose the Greatest SSD for the PS5 in 2024

Which SSDs work with the PlayStation 5? Fortunately, it’s not too hard to find a roomy PS5 SSD to go with your console’s internal drive. As long as the PCIe 4.0 SSD has a heatsink that keeps the overall height of the device below 11.25mm and can provide at least 5,500 MB/s of throughput over the NVMe interface, it can be used as a PS5 SSD. Even slower SSDs will work just fine (PCIe 4.0 is still necessary), though the PS5 might alert you to the possibility of poorer performance if you choose one.

Does a PS5 SSD heatsink really need one? According to Sony, it is possible to simply install a custom heatsink on SSDs that aren’t sold exclusively for the PS5. One of the greatest external drives may also be used with the PS5 to store games, but keep in mind that these are only meant to be used for game storage; an internal expansion drive is required to play the games.

For the PS5, what size SSD should you purchase? A 1TB drive might be plenty for you, but because of the current low pricing trends for these models, we advise choosing a 2TB or 4TB model instead. Who wouldn’t want additional storage for additional games, anyway?

In the end, the ideal PS drive is one that offers a price you can afford and enough storage to save your data and games. We’ve tested a number of the best SSDs in our labs (see the findings lower down the page) and selected the best ones to create a list of the best PS5 SSDs to aid in your selection.

HOW TO INSTALL A PS5 SSD

You will need your PS5 console, a cross-head screwdriver (Phillips #1 or equivalent), and a PS5 compatible SSD in order to install your SSD. Before continuing, please ensure that your console is fully unplugged and shut off for safety.

Initially, position your console so that the PlayStation logo is facing down and the power button is facing you. Take off the top console cover if you have the launch PS5 model by pulling it up and sliding it to the right. If your PS5 Slim is one of the more recent models, locate the triangle-labeled area on the cover and pull it away from the console until you hear a click.

After that, insert the SSD into the exposed M.2 port while holding it at an angle. Press it down and screw it in once the contacts are in position. Replace the expansion slot cover and screw it in after it is installed.

When the console cover is back on, you’re good to go. Reattach the console’s power supply, then turn it on.

Sony PS5 SSD Requirements

An M.2 SSD that supports NVMe protocol communication is needed for the Sony PS5. A PCIe 4.0 x4 model with a sequential read performance of up to 5,500 MB/s is officially required. Slower SSDs can be used in practice; however, you will only receive a warning that performance may be insufficient. It should be noted that PCIe 3.0 devices are expressly forbidden from operation. Models of 250GB, 500GB, 1TB, 2TB, 4TB, and 8TB are supported by the console.

These tiny, rectangular drives resemble tiny RAM sticks, and the PS5 supports both single- and double-sided models. Additionally, be sure that a cooling solution has been applied to your drive already. These can be full-fledged metal heatsinks with a thermal conductor, or they can be thin copper heat spreaders that resemble labels.

Although not all of the top SSDs for the PS5 include a heatsink, you can simply use a single- or double-sided heatsink of your own. We suggest the Sabrent M.2 NVMe heatsink for the PS5, which essentially installs a heatsink in place of the PS5’s outside SSD panel to provide the SSD with access to colder air from outside the system. Although there are other solutions available, we’ve found that this cooler is a wonderful choice if you’re seeking for an inexpensive, adaptable, and simple-to-install solution. For example, TeamGroup will shortly release their new TForce AL1 heatsink, which functions in a similar manner.

Simply ensure that the SSDs measure no more than 110 x 25 x 11.25 mm. M.2 SSDs, often known as size 2280, are typically 80 mm length by 22 mm broad, though some could be longer or shorter. M Key Types 2230, 2242, 2260, 2280, and 22110 are supported by the PS5. While rare, some M.2 drives have SATA interfaces rather than NVMe, therefore they wouldn’t be classified as PCIe 4.0 compliant. In any case, confirm that NVMe is supported by your SSD.

To transfer installed games to your new drive, choose the internal SSD, select the object you wish to relocate, click the Options icon, and choose ‘Move Games and Apps.’ After checking the boxes next to the games you want to move, click “Move.” Moving from the integrated SSD will typically be far faster than moving to the integrated disk, as our testing above has shown.